2 nüvi 310/360 Owner’s ManualGETTING STARTEDMounting the nüvi on the WindshieldFor a tight grip, clean and dry your windshield and the suction cup with a lint-freecloth before mounting the suction cup.To mount the suction cup mount:1. Place the suction cup on the windshield.2. Flip the lever back, toward the windshield.3. Open the antenna. Fit the bottom of your nüvi into the cradle.4. Tilt your nüvi back until it snaps into place. If necessary, rotate the cradle.5. Plug the small end of the cable into the back of the mount (not the side of thenüvi); plug the other end into a 12/24-Volt receptacle in your vehicle.➍➌Microphonejack➎➋➊WindshieldIf you are using the external microphone (optional) for the phone functions, plug themicrophone into the right side of the nüvi cradle.To remove your nüvi from the cradle, press the small tab on the bottom of the cradleup, and tilt the nüvi forward.
