Garmin AIS 300 Technical Reference

Also see for GPS 17x NMEA 2000: Important safety information Configuration guide Declaration of conformity Installation instructions

Garmin AIS 300 Technical Reference Manual pdf 5 page image

Technical Reference for Garmin NMEA 2000 Products NMEA 2000 FundamentalsNMEA 2000 FundamentalsA NMEA 2000 network is made of connected NMEA 2000 devices that communicate using basic plug-and-play functionality.If your boat already contains a NMEA 2000 network and you would like to add Garmin NMEA 2000 components, see page 8.For a glossary of commonly used NMEA 2000 terms, see page 8.After you have installed your NMEA 2000 network, use the checklist on page 37 to verify the installation.Garmin NMEA 2000 Device OverviewGarmin uses NMEA 2000 micro connectors on units, sensors, and T-connectors that are compatible with other NMEA 2000 micro connectors,cables, and NMEA 2000-compatible devices. Garmin sensors may be packaged with a drop cable and a T-connector. Garmin displays may alsoinclude additional NMEA 2000 components (such as a power cable). The NMEA 2000 components included with a Garmin sensor or displayare listed in the product documentation. A diagram on the product box shows which NMEA 2000 components are included.+ -Sample Box Diagram (GFS 10)In the sample box diagram, a complete NMEA 2000 network is shown, and the parts included with the sensor are shaded. In this example, aT-connector is included with a Garmin GFS 10 fuel sensor. A NMEA 2000 power cable, terminators, an additional drop/backbone cable, andadditional T-connectors are not included with a GFS 10 fuel sensor. The GFS 10 fuel sensor, as shown by the shaded components in the boxdiagram, is intended to be connected to an existing NMEA 2000 network on your boat. If you do not have a NMEA 2000 network on your boat,this guide will help you assemble one.