AppendixSpecificationsDimensions (W x H x D) 175 x 142.3 x 54.5 mm (6.9 x 5.6 x 2.1 in.)Weight 414 g (0.9 lbs.)Operating temperature range From -15° to 55°C (from 5° to 131°F)Storage temperature range From -20° to 75°C (from -4° to 167°F)Water rating* IEC 605290 IPX7Current draw 12 Vdc: < 400 mA24 Vdc: < 250 mAPower input 12 to 24 Vdc, 2 A max.NMEA 2000 LEN 2Transmit power 5 W (1 W remote switchable by authorities)Antenna port impedence 50 ohmCompass-safe distance 40 cm (15 3/4 in.)**The device withstands incidental exposure to water of up to 1 m for up to30 min. For more information, go to www.garmin.com/waterrating.NMEA 2000 PGN InformationType PGN DescriptionReceive 059392 ISO acknowledgment059904 ISO request060928 ISO address claim126208 NMEA: Command, request,acknowledge groupfunction126992 System timeTransmit 059392 ISO acknowledgment060928 ISO address claim126208 NMEA: Command, request,acknowledge groupfunction126464 PGN list126996 Product information129038 AIS class A position report129039 AIS class B position report129040 AIS class B extendedposition report129041 AIS aids to navigation(AtoN) report129794 AIS class A static andvoyage related data129795 AIS addressed binarymessage129797 AIS binary broadcastmessage129798 AIS SAR aircraft positionreport129802 AIS safety relatedbroadcast message129809 AIS class B "CS" static datareport, part A129810 AIS class B "CS" static datareport, part BStatus LEDsLED State DescriptionVHF TX Solid A connected VHF radio is transmitting.Error Flashing The device has encountered a critical error. You canconnect the device to a computer, and use the AIS 800setup software to view detailed information about thewarning condition.SRM Flashing The device is transmitting an SRM.LED State DescriptionWarning Flashing The device detects a warning condition. You can connectthe device to a computer, and use the AIS 800 setupsoftware to view detailed information about the warningcondition.RX Only Flashing The device is receiving an AIS message.TX Flashing The device is sending an AIS message.RX Solid The device is in silent mode or not ready to transmit.NOTE: The AIS 800 device does not transmit without a GPSsignal or an MMSI number, when the AIS base stationcommands a quiet time, or when the device encounters acritical error.Power Solid The device is ready to transmit and receive.VHF TX, Error,Warning, andPower.Solid The device is connected only to a USB cable.© 2018 Garmin Ltd. or its subsidiariesGarmin®and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries,registered in the USA and other countries. These trademarks may not be used withoutthe express permission of Garmin.NMEA®, NMEA 2000®, and the NMEA 2000 logo are registered trademarks of theNational Marine Electronics Association.3