Mic Squelch1 and 2The input level required to break squelch by themicrophone is set from this page. Lower numbersindicate a higher input level necessary to break squelch.Turn the Small knob to change the value. The range isfrom 0 to 127.Transmit Mic The Transmit Microphone page allows you to controlwhich microphone is permitted to transmit. You maychoose Mic 1, 2, or both. To adjust the Transmit Miccontrol:1. Press and hold the MON button forabout two seconds. This will access theSystem Functions mode.2. Rotate the Large knob to display theTransmit Mic page.3. Rotate the Small knob to select MIC1,MIC2, or MIC1+MIC2.4. Press any key to exit the SetupFunctions mode.5. Select an appropriate frequency, key thetransmitter, and talk into themicrophones to check for the intendedoperation.IntercomLevelThis function adjusts the Intercom Audio Level. Turnthe Small knob to change the value. The range is from 0to 255. Setting the value to 0 slaves the sidetone level tothe volume control knob.12System FunctionsIntcom LvlMic1 Sqlch