Connecting to a Paired PhoneBefore you can connect to your phone, you must pair yourphone to your device.When you connect to your phone using Bluetooth wirelesstechnology, you can share scores and other data to GarminConnect. You can also view phone notifications on your device.1 On your phone, enable Bluetooth wireless technology.2 On your device, select Setup > Bluetooth > Connection >On to enable Bluetooth wireless technology.3 Select Notifications to show or hide phone notifications.Phone NotificationsNOTE: Phone notifications require an Apple® iPhone®equipped with Bluetooth 4.0 wireless technology and iOS® 7 orlater.When your phone receives messages, it sends notifications toyour device.Viewing NotificationsBefore you can view notifications, you must connect to yourpaired phone (Connecting to a Paired Phone).1 Select > Notifications.2 Select a notification.3 Select or to scroll through the contents of thenotification.AppendixInstalling a Memory CardYou can install a microSD™ memory card for additional storageor pre-loaded maps.1 Pull up the weather cap À from the microSD card slot Á.2 Press in the card until it clicks.Device CareNOTICEDo not store the device where prolonged exposure to extremetemperatures can occur, because it can cause permanentdamage.Never use a hard or sharp object to operate the touch screen,or damage may result.Avoid chemical cleaners and solvents that can damage plasticcomponents.Secure the weather cap tightly to prevent damage to the mini-USB port.Cleaning the ScreenBefore you can clean the screen, you should have a soft, clean,lint-free cloth and water, isopropyl alcohol, or eyeglass lenscleaner.Apply the liquid to the cloth, and gently wipe the screen with thecloth.Cleaning the Device1 Wipe the device using a cloth dampened with a milddetergent solution.2 Wipe it dry.Using the Backlight• At any time, tap the touchscreen to turn on the backlight.NOTE: Alerts and messages also activate the backlight.• Select to turn on the backlight and adjust the brightness.• Change the backlight timeout (Settings).SpecificationsBattery Type Lithium-polymerBattery Life Up to 15 hoursOperating TemperatureRangeFrom -4°F to 140°F (from -20°C to60°C)Charging Temperature Range From 32°F to 113°F (from 0°C to 45°C)Water Resistance IPX7Calibrating the TouchscreenIf the touchscreen does not seem to be responding properly,you can calibrate it.1 Select Setup > Display > Calibrate Screen.2 Follow the on-screen instructions.Clearing User DataNOTE: This deletes all user-entered data.1 Hold to turn off the device.2 Place your finger on the top left corner of the touchscreen.3 While holding your finger on the touchscreen, turn on thedevice.4 Select Yes.Using the ClipNOTE: Your clip may look slightly different from the image.You can use the clip to attach the device to your belt, pocket, orbag.1 Slide the bottom of the device into the bottom of the clip.NOTE: If you place the device into the clip upside-down, itdoes not lock into place and could fall out of the clip easily.2 Press the top of the device into the top of the clip until itclicks.3 To remove the device, pull up the top of the clip whilepressing on the back of the device, and slide the bottom ofthe device out of the bottom of the clip.Appendix 5