Garmin Approach S2 Getting Started

Also see for Approach S2: Owner's manual Quick start manual Manual User manual

Contents

2 Select Measure Shot.3 Walk to your ball.The distance automatically resets when you move to the nexthole.Viewing Layup and Dogleg DistancesYou can view a list of layup and dogleg distances for par 4 and5 holes.From the hole view (Hole View), select .Layup À and distance to reach the layup Á appear on thescreen.NOTE: Distances are removed from the list as you passthem.Keeping ScoreBefore you can begin keeping score, you must start a round(Playing Golf).1 From the hole view (Hole View), hold .2 Select Start Scoring.3 Select or to set the score.Your total score À is updated.4 Select OK to return to the hole view.Reviewing ScoresYou can edit individual scores but not the total score.1 Hold .2 Select Scorecard.3 Select or to select the hole.4 Select OK to edit.Viewing Scorecards on a ComputerYou can view all saved scorecards on your computer.1 Connect the device to a USB port on your computer usingthe charging cradle.2 The device appears as a removable drive in My Computer onWindows® computers, and as a mounted volume on Mac®computers.3 Open ScorecardViewer.html to view your scorecards.Using the OdometerYou can use the odometer to record the time and distancetraveled. The odometer automatically starts and stops when youstart or end a round, and you can also start and stop itmanually.1 Hold .2 Select Odometer to view or start the odometer.3 Select an option:• Select > Continue to keep using the odometer.• Select > Turn Off to stop the odometer.• Select > Reset to reset the time and distance.Customizing Your DeviceSettingsHold , and select Setup.Time: Sets the time to automatic or manual (Setting the TimeManually).Format: Sets the time format to 12- or 24-hour.Tones: Turns audible tones on or off.Language: Sets the language.Units: Sets to measure distance in yards or meters.Setting the Time ManuallyBy default, the time is set automatically when the deviceacquires satellite signals.1 Hold .2 Select Setup > Time > Manual.3 Select or to set the hour and minute.4 Select AM or PM.Setting the Alarm1 Hold .2 Select Alarm > Set.3 Select or to set the hour and minute.4 Select AM or PM.5 Verify the alarm is set to On.Viewing Device InformationYou can view the software version and unit ID.1 Hold .2 Select About.AppendixDevice CareNOTICEAvoid extreme shock and harsh treatment, because it candegrade the life of the product.Avoid pressing the keys under water.Do not use a sharp object to clean the device.Avoid chemical cleaners, solvents, and insect repellents thatcan damage plastic components and finishes.Thoroughly rinse the device with fresh water after exposure tochlorine, salt water, sunscreen, cosmetics, alcohol, or otherharsh chemicals. Prolonged exposure to these substances candamage the case.Do not store the device where prolonged exposure to extremetemperatures can occur, because it can cause permanentdamage.Cleaning the Device1 Wipe the device using a cloth dampened with a milddetergent solution.2 Wipe it dry.2

/ 4

Related manuals for Garmin Approach S2