Garmin Automobile Accessories Quick Reference Manual
  |
To stop or resume the current route:1. Press the MENU key, highlight Route Options, and press OK. A RouteOptions menu appears.2. Highlight Stop Navigation or Resume Navigation, and press OK tostop or start the active route.To add via points (extra stops) during a route:1. Press the MENU key, highlight Route Options, and press OK. A RouteOptions menu appears.2. Highlight Vias, and press OK. An information page for your currentroute appears.3. Use the Rocker pad to highlight the Via Points box, and press OK.4. Highlight and press OK. A window appearswith three options for finding your location.5. Select one of the three options. Once you select an option, the new viapoint appears on your route page.6. To add more via points, repeat steps 4 and 5 above.7. Highlight Navigate, and press OK when you are done. Your originalroute is automatically recalculated to include the newly-added viapoint(s).To install the vehicle suction cup mount:1. Align the ball on the end of the suction mount with the socket (hole)on the back of the cradle. Press firmly to snap the mount and cradletogether.2. Flip up the antenna on the back of the unit. Angle the Quest forwardand fit the bottom of the Quest into the cradle. Tilt the unit back until itsnaps in place.3. To ensure a tight grip, clean and dry your windshield before you mountthe suction cup. Flip the lever on the suction cup toward you.4. Place the suction cup on your windshield. Flip the lever back, towardthe windshield.5. Plug the power cable into an available receptacle.NOTICE TO STATE OF CALIFORNIA DRIVERS: California Vehicle Code Section 26708 (a) (1) providesthat drivers in California should not use suction mounts on their windshield or side or rear windows. Other Garmindashboard or friction mounting options should be used. For available accessories, refer to the Garmin Web site atwww.garmin.com. Also, refer to the Owner’s Manual for instructions on using the included mounting disk with thesuction cup mount.© Copyright 2006 Garmin Ltd. or its subsidiariesJanuary 2006 190-00556-11 Rev. A Printed in TaiwanFinding Places and Routing to ThemTo find a place and route to it:1. Press the FIND key. A Find page appears.2. Highlight an option that will help you find your destination, such as AutoFuel, Food & Drink, or Lodging. Press the OK key. A list of places nearyour current location appears.3. Highlight the place you wish to visit, and press OK. An informationpage appears. (If you know you will want to visit this place again, selectSave to add it to your My Locations list.)4. Highlight Route To on the information page, and press OK. Your Questcalculates the route. Follow the calculated route to the destination.To find an address and route to it:1. Press the FIND key, highlight Addresses, and press OK.2. A Wizard opens. Highlight the state if it appears on a button, or chooseSelect State and find the correct name. Press OK.3. Highlight Search All Cities, and press OK. You can also highlightSpell City, and press OK. Enter the city using the on-screen keyboard.4. Enter the address number and street using the on-screen keyboard.For intersections, you only need to enter street names.5. A list of addresses appears. Highlight the desired address, and pressOK. An Address page appears.6. To create a route to this address, highlight Route To, and press OK.Quest™ 2 Quick Reference GuideUse this Quick Reference Guide to learn how to perform commonoperations with your Quest 2. For a more thorough and detailedexplanation of operations and features, consult the Owner’s Manual.Keep this guide in a handy place for future reference.Turning the Quest OnPress and hold the Power key on the front of the unit to turn it on.Vehicle InstallationSelect a suitable location for installing the unit that allows routing ofthe power cord and does not interfere with vehicle operation. Refer tothe safety warnings in the Owner’s Manual. Select a location where theQuest’s flip-up antenna has an unobstructed view of the sky. For optimaluse, position the antenna parallel to the surface of the road.Stopping & Starting Routes and Adding Via PointsInstalling the Suction Cup MountSuctioncupLeverReleasetabCradleSuctioncup tab |
Related manuals for Garmin Automobile Accessories
Garmin 80 Quick Reference Manual
Garmin 370 Quick Reference Manual
Garmin 350 Quick Reference Manual
Garmin NUVI Quick Reference Manual
Garmin nuvi Quick Reference Manual
Garmin GPS 12 Quick Reference Manual
Garmin G3X MFD Quick Reference Manual
Garmin Quest 2 Quick Reference Manual
Garmin aera 510 Quick Reference Manual
Garmin aera 796 Quick Reference Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine