Garmin BC 30 Quick Start Manual

Also see for BC 30: Owner's manual Installation instructions Owner's manual Troubleshooting

Contents

Garmin BC 30 Quick Start Manual Manual pdf 11 page image

BC30TM 11• The curb, driveway, or parking stalllines should be clearly visible on thedevice.2 From the main menu, select Settings >Backup Camera.3 Select the camera to adjust, and selectGuidance Lines > Adjust GuidanceLines.4 Use the arrows in the corners of thescreen to move the guidance lines tomatch the angle and position of thecurb, driveway, or parking stall lines.• The guidance lines should appear di-rectly on top of your reference points.5 Use the arrows in the center of thescreen to move the guidance lines up ordown. The red section of the guidancelines should be aligned with the rear ofyour vehicle.6 If necessary, reposition the vehiclewith the other side closely aligned toa curb, driveway, or parking stall lines,and repeat the alignment process. Youshould attempt to keep the guidancelines symmetrical, even if your vehicleis not in perfect alignment with the curb,driveway, or parking stall lines.7 Select after alignment is complete.Showing or Hiding Guidance Lines1 From the camera view, select >Guidance Lines.2 Select or clear the Show GuidanceLines check box.Restoring AlignmentYou can reset the guidance lines to theirdefault alignment.1 Select Settings > Backup Camera.2 Select the camera to adjust, and selectGuidance Lines > Restore.AppendixSpecificationsCamera andtransmitter inputvoltageFrom 9 to 28 VdcTransmitter fuseTransmitter fuse 500 mA, fast-blowCamera andtransmitter currentusage150 mA at 12 VdcCamera and trans-mitter waterproofratingIPX7*Camera view angle 170 degree (Diag-onal)Camera Minimumillumination1 luxCamera tempera-ture rangeFrom -40° to 85°C(from -40° to 185°F)