Garmin BC 35 Installation Instructions Manual

Also see for BC 35: Owner's manual Installation instructions Owner's manual

Contents

Garmin BC 35 Installation Instructions Manual Manual pdf 1 page image

BC™ 35 WIRELESS BACKUPCAMERAInstallation InstructionsIntroductionWARNINGSee the Important Safety and Product Information guide in the product box forproduct warnings and other important information.Garmin®strongly recommends having an experienced installer with the properknowledge of electrical systems install the device. Incorrectly wiring the powercable can result in damage to the vehicle or the battery and can cause bodilyinjury.When connecting the power cable, do not remove the in-line fuse holder. Toprevent the possibility of injury or product damage caused by fire or overheating,the appropriate fuse must be in place as indicated in the product specifications.In addition, connecting the power cable without the appropriate fuse in place willvoid the product warranty.CAUTIONAlways wear safety goggles, ear protection, and a dust mask when drilling,cutting, or sanding.NOTICEWhen drilling or cutting, always check what is on the opposite side of the surface.These installation instructions do not apply to a specific vehicle type, and aremeant as a guide when installing this product on your vehicle. For questionsspecific to your vehicle, you should contact the vehicle manufacturer.Device OverviewItem DescriptionÀ TransmitterÁ CameraÂ Camera mounting bracketTools Needed• Drill and 10.008 mm, or size X (0.397 in.) drill bitPrinted in TaiwanDecember 2017190-02351-90_01Confidential