Installing Garmin ExpressThe Garmin Express application is available for Windows®and Mac®computers.1 On your computer, go to garmin.com/express.2 Select an option:• To view the system requirements and verify the Garmin Express application is compatible with yourcomputer, select System Requirements.• To install on a Windows computer, select Download for Windows.• To install on a Mac computer, select Download for Mac.3 Open the downloaded file, and follow the on-screen instructions to complete the installation.Device CareNOTICEAvoid dropping your device.Do not store the device where prolonged exposure to extreme temperatures can occur, as it can causepermanent damage.Never use a hard or sharp object to operate the touchscreen as this may result in damage.Do not expose the device to water.Cleaning the outer casingNOTICEAvoid chemical cleaners and solvents that can damage plastic components.1 Clean the outer casing of the device (not the touchscreen) using a cloth dampened with a mild detergentsolution.2 Wipe the device dry.Cleaning the Touchscreen1 Use a soft, clean, lint-free cloth.2 If necessary, lightly dampen the cloth with water.3 If using a dampened cloth, turn off the device and disconnect the device from the power.4 Gently wipe the screen with the cloth.Avoiding theft• Remove the device and mount from sight when not in use.• Remove the residue left on the windscreen by the suction cup.• Do not keep your unit in the glove compartment.• Register your device using the Garmin Express software (garmin.com/express).Restarting the DeviceYou can restart your device if it stops functioning.Hold the power key for 12 seconds.Removing the Device, Mount and Suction CupRemoving the Device from the Mount1 Press the release tab or button on the mount.2 Tilt the bottom of the device upward, and lift the device from the mount.Device maintenance 43