Garmin Colorado Series Owner's Manual

Also see for Colorado 400c: Quick start guide Owner's manual Quick start guide Owner's manual Quick reference guide

Garmin Colorado Series Owner's Manual Manual pdf 41 page image

Colorado ™ Series Owner’s Manual appendIxConnecting Your Colorado to aComputerYou can connect the Colorado to your computer usingthe supplied USB cable.NOTE: Install the supplied Trip and WaypointManager software on your computer beforeconnecting the USB cable. Follow the instructionsprovided with the software.To connect your Colorado to yourcomputer:1. Lift the weather cap on the top of the Coloradoand insert the smaller connector on the USBcable into the USB mini-B jack.2. Connect the remaining cable end to an emptyUSB port on your computer.Information About USB DriversThe USB drivers are automatically installed when youinstall the Trip and Waypoint Manager software thatcame with your Colorado. When you initially connectthe Colorado to a USB port, your computer mightprompt you to locate the destination of the drivers forthe device. You only need to install the drivers once.After the drivers are installed, your computer alwaysdetects your Colorado when it is connected. USBdrivers might be updated periodically. You can findupdates at www.garmin.com.Transferring Tracks, Routes, orWaypoints from the Colorado to YourComputerTracks, routes, and waypoints saved on your Coloradocan be saved and viewed in the Trip and WaypointManager software.To transfer tracks, routes, or waypoints:1. Ensure that Trip and Waypoint Manager isinstalled on your computer and open.2. Ensure that the Colorado is connected to thecomputer with the USB cable and powered on.3. Click Receive from Device on the Transfermenu or click the Receive from Device icon atthe top of the screen.