Garmin DA42-L360 Cockpit Reference Manual

Also see for Cessna Caravan G1000: Cockpit reference guide Pilot's guide Pilot's guide Pilot's guide Pilot's guide

Contents

Garmin DA42-L360 Cockpit Reference Manual Manual pdf 25 page image

Garmin G1000 Cockpit Reference Guide for the DA42-L360190-01062-01 Rev. A 9nav/Com/xpDr/Audio panelFlightInstruments EISNav/Com/XPDR/Audio AFCS GPS NavFlightPlanning ProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/Alerts Appendix IndexnAv/COm/trAnspOnDer/AuDiO pAnelenter Or ChAnge Flight iD1) Press the TMR/REF Softkey, then turn the large FMS Knob to highlight theFlight ID field.2) Turn the small FMS Knob to enter the first character.3) Turn the large FMS Knob to select the next field.4) Turn the small FMS Knob to enter the next desired character.5) Repeat steps 3 and 4 until the desired Flight ID is entered.6) Press the ENT Key to update the Flight ID.enter A trAnspOnDer CODe1) Press the XPDR Softkey to display the transponder mode selection softkeys.2) Press the CODE Softkey to display the transponder code selection softkeys,for digit entry.3) Press the digit softkeys to enter the code in the code field. When enteringthe code, the next key in sequence must be pressed within 10 seconds, orthe entry is cancelled and restored to the previous code. Five seconds afterthe fourth digit has been entered, the transponder code becomes active.ADF tuning (OptiOnAl)1) Press the ADF/DME Softkey.2) Turn the small FMS Knob to enter the first digit of the desired ADFfrequency.3) Turn the large FMS Knob to select the next desired field.4) Turn the small FMS Knob to enter the desired number.5) Repeat steps 3 and 4 until the desired ADF frequency is entered.6) Press the ENT Key to accept the new frequency.7) Press the ENT Key again to transfer the frequency to the active field.8) Turn the large FMS Knob to select the MODE field.9) Turn the small FMS Knob to select ANT, ADF, ADF/BFO, or ANT/BFO.10) Press the ENT Key to complete the selection.