Garmin DASH CAM 54 Owner's Manual

Also see for DASH CAM 45: User manual

Contents

Garmin DASH CAM 54 Owner's Manual Manual pdf 10 page image

Controlling the Camera Using VoiceCommandsNOTE: The voice control feature is not available for the 45product model.1 Say OK, Garmin to activate the voice control feature.The camera plays a tone and starts listening for a command.2 Say a command:• To save a video, say Save Video.• To take a picture, say Take a Picture.• To record audio with the video, say Record Audio.• To record video without audio, say Stop Audio.• To start Travelapse, say Start Travelapse.• To stop Travelapse, say Stop Travelapse.The camera plays a tone when it recognizes your command.Turning Voice Control On or OffSelect > Voice Control > Settings > Disable.Voice Control Tips• Speak in a normal voice directed at the device.• Reduce background noise to increase the accuracy of thevoice recognition.• Before each command, say OK, Garmin.• Listen for a tone to confirm that the camera successfullyrecognized a command.SettingsCamera SettingsSelect > Settings > Camera.Resolution: Adjusts the video resolution.Event Detection: Turns on and off event detection (EventDetection, page 2).Record Audio: Turns on and off audio recording (Turning AudioRecording On or Off, page 2).Data Overlay: Adjusts the type of data displayed on videos andpictures.Unsaved Videos: Determines when the device deletes unsavedvideo footage. When the Delete When Full option isselected, the device deletes the oldest unsaved video whenthe memory card storage is full. When the Promptly Deleteoption is selected, the device continually deletes unsavedvideo more than three minutes old and deletes all unsavedvideo each time it is powered off. This is useful to helpprotect data privacy. While the Promptly Delete option isselected, you cannot record Travelapse videos or viewunsaved video in the gallery.Record After Power Loss: Sets the amount of time that thedevice continues to record video after power is turned off.Record While Parked: Allows the camera to record video whilethe vehicle is parked and turned off, and sets the amount oftime the camera remains active while parked. This feature isonly available when the Dash Cam parking mode cableaccessory is connected to the camera (Recording VideosWhile Parked, page 3).NOTICEDue to privacy regulations, this feature is not available in allareas. It is your responsibility to know and comply withapplicable laws and rights to privacy in your jurisdiction.Format Card: Formats the memory card and deletes all videos,photos, and data on the card.Video Resolution SettingsYou can change the video resolution on your camera.Resolution is the height of the video in pixels. Higher resolutionvideo settings require more memory card space than lowerresolution settings.Select Settings > Camera > Resolution.1440p, 30fps: Records video in 1440p resolution at 30 framesper second.NOTE: This option is available only for the 54/55/65Wproduct models.1080p, 60fps: Records video in 1080p resolution at 60 framesper second.NOTE: This option is available only for the Garmin Dash Cam54/55 product models.1080p, 30fps, HDR: Records video in 1080p resolution at 30frames per second using high dynamic range (HDR) imaging.HDR imaging records multiple exposure levels for each frameand can improve video clarity in high contrast or low-lightconditions.NOTE: This option is available only for the Garmin Dash Cam54/55 product models.1080p, 30fps: Records video in 1080p resolution at 30 framesper second.720p, 30fps: Records video in 720p resolution at 30 frames persecond.Driver Assistance SettingsSelect > Settings > Driver Assistance.Camera Placement: Allows you to indicate the placement ofyour device in the vehicle (Setting the Camera Placement,page 2).Forward Collision: Adjusts the sensitivity of the FCWS feature.Go Alert: Turns on or off the go alert display and audible alertswhen traffic starts moving (Go Alert, page 5).Lane Departure: Adjusts the lane boundary settings (LaneDeparture Warning System, page 5).Proximity Alerts: Adjusts the audible proximity alerts.Proximity Alerts SettingsThe camera plays a tone and shows an on-screen alert whenyou approach proximity points, such as a speed camera or red-light camera. To use proximity alerts, you must have proximitypoint data on your device, such as a speed camera or red-lightcamera database. You can customize the behavior of proximityalerts.NOTE: This feature is not available in all areas.Select Settings > Driver Assistance > Proximity Alerts.Audio: Sets the style of alert that plays when you approachproximity points.Alerts: Sets the type of proximity points for which alerts areplayed.Delete Files: Allows you to delete proximity point data.NOTE: This option is provided primarily for commercialdistribution and deployment applications. Most users shouldnot delete proximity point data. Deleted proximity point datacannot be restored, and updates are not available for adeleted database. If your proximity point database is out ofdate, you should update it instead of deleting it.Update: Shows instructions for updating the proximity point dataon your device.System SettingsSelect > Settings > System.6 Settings