Garmin DRIVE 51 Owner's Manual

Also see for DRIVE 51: Owner's manual Owner's manual

2 If no cameras are found for the road, select Find Cameras toview or save nearby traffic cameras (optional).Saving a Traffic Camera1 Select Apps > photoLive.2 Select Touch to Add.3 Select a road.4 Select an intersection.5 Select Save.Viewing Previous Routes and DestinationsBefore you can use this feature, you must enable the travelhistory feature (Device and Privacy Settings, page 16).You can view your previous routes and places you have stoppedon the map.Select Apps > Where I've Been.Garmin Drive SettingsMap and Vehicle SettingsSelect Settings > Map & Vehicle.Vehicle: Sets the icon that represents your position on the map.Driving Map View: Sets the perspective on the map.Map Detail: Sets the level of detail on the map. More detail maycause the map to draw slower.Map Theme: Changes the color of the map data.Map Tools: Sets the shortcuts that appear in the map toolsmenu.Map Layers: Sets the data that appears on the map page(Customizing the Map Layers, page 10).Auto Zoom: Automatically selects the zoom level for optimaluse of your map. When disabled, you must zoom in or outmanually.myMaps: Sets which installed maps the device uses.Enabling MapsYou can enable map products installed on your device.TIP: To purchase additional map products, go tohttp://buy.garmin.com.1 Select Settings > Map & Vehicle > myMaps.2 Select a map.Navigation SettingsSelect Settings > Navigation.Route Preview: Shows a preview of the major roads in yourroute when you start navigation.Calculation Mode: Sets the route calculation method.Avoidances: Sets road features to avoid on a route.Custom Avoidances: Allows you to avoid specific roads orareas.Toll Roads: Sets preferences for avoiding toll roads.Tolls and Fees: Sets preferences for avoiding toll roads and tollstickers.NOTE: This feature is not available in all areas.Environmental Zones: Sets the avoidance preferences forareas with environmental or emissions restrictions that mayapply to your vehicle.Restricted Mode: Disables all functions that require significantoperator attention.GPS Simulator: Stops the device from receiving a GPS signal,and saves battery power.Calculation Mode SettingsSelect Settings > Navigation > Calculation Mode.The route calculation is based on road speeds and vehicleacceleration data for a given route.Faster Time: Calculates routes that are faster to drive but canbe longer in distance.Shorter Distance: Calculates routes that are shorter in distancebut can take more time to drive.Off Road: Calculates a direct line from your location to yourdestination.Setting a Simulated LocationIf you are indoors or not receiving satellite signals, you can usethe GPS simulator to plan routes from a simulated location.1 Select Settings > Navigation > GPS Simulator.2 From the main menu, select View Map.3 Tap the map twice to select an area.The address of the location appears at the bottom of thescreen.4 Select the location description.5 Select Set Location.Driver Assistance SettingsSelect Settings > Driver Assistance.Audible Driver Alerts: Enables an audible alert for each type ofdriver alert (Driver Awareness Features and Alerts, page 2).Fatigue Warning: Alerts you when you have been driving for along period without a break.Proximity Alerts: Alerts you when you are near custom pointsof interest or red light cameras.NOTE: You must have custom points of interest (POIs)loaded for proximity points alerts to display. This feature isnot available in all areas.Backup Camera SettingsThe backup camera settings allow you to manage pairedGarmin backup cameras and camera settings. This menuappears on your navigation device only when the device isconnected to a wireless camera receiver cable. See the owner'smanual for your backup camera for detailed information aboutpairing cameras and camera settings. Go to garmin.com/backupcamera to purchase a Garmin backup camera.Select Settings > Backup Camera, and select a paired camera.Unpair: Removes the paired camera. You must pair the cameraagain before you can view it using this device and cable.Rename: Allows you to rename the paired camera.Guidance Lines: Shows or hides guidance lines and allows youto adjust the position of the guidance lines.babyCam SettingsThe babyCam settings allow you to manage paired GarminbabyCam™ cameras and camera settings. This menu appearson your navigation device only when the device is connected toa wireless camera receiver cable. See the owner's manual foryour camera for detailed information about pairing cameras andcamera settings. Go to garmin.com/babycam to purchase aGarmin babyCam camera.Select Settings > babyCam, and select a paired camera.Power Settings: Allows you to set the amount of time the videoappears on the screen.Flip Video: Allows you to flip or mirror the video.Alignment: Displays the babyCam video to help you align thecamera.Garmin Drive Settings 15