Garmin ECHOMAP UHD2 5 Series Owner's Manual

Setting the Water Temperature OffsetThe temperature offset compensates for the temperature reading from a temperature sensor or temperature-capable transducer.1 Measure the water temperature using the temperature sensor or temperature-capable transducer that isconnected to the network.2 Measure the water temperature using a different temperature sensor or a thermometer that is known to beaccurate.3 Subtract the water temperature measured in step 1 from the water temperature measured in step 2.This value is the temperature offset. Enter this value in step 5 as a positive number if the sensor measuresthe water temperature as being colder than it actually is. Enter this value in step 5 as a negative number if thesensor measures the water temperature as being warmer than it actually is.4 Select > My Vessel > Temp. Offset.5 Enter the temperature offset value calculated in step 3.Restoring the Original Chartplotter Factory SettingsNOTE: This affects all devices on the network.1 Select > System > System Information > Reset.2 Select an option:• To reset the device settings to the factory default values, select Reset Default Settings. This restores thedefault configuration settings, but does not remove saved user data, maps, or software updates.• To clear saved data, such as waypoints and routes, select Delete User Data. This does not affect maps orsoftware updates.• To clear saved data and reset device settings to the factory default values, disconnect the chartplotterfrom the Garmin Marine Network, and select Delete Data and Reset Settings. This does not affect mapsor software updates.Sharing and Managing User DataWARNINGThis feature allows you to import data from other devices that may have been generated by third parties.Garmin makes no representations about the accuracy, completeness, or timeliness of data that is generated bythird parties. Any reliance on or use of such data is at your own risk.You can share user data between compatible devices. User data includes waypoints, saved tracks, routes, andboundaries.• You can share and manage user data using a memory card. You must have a memory card installed in thedevice. This device supports up to a 32 GB memory card, formatted to FAT32.Selecting a File Type for Third-Party Waypoints and RoutesYou can import and export waypoints and routes from third-party devices.1 Insert a memory card into the card slot.2 Select > User Data > Data Transfer > File Type.3 Select GPX.To transfer data with Garmin devices again, select the ADM file type.60 Sharing and Managing User Data