Garmin ECHOMAP ULTRA100 Series Owner's Manual

Deleting a Waypoint or an MOB1 Select Nav Info > Waypoints.2 Select a waypoint or an MOB.3 Select Review > Delete.Deleting All WaypointsSelect Nav Info > Manage Data > Clear User Data >Waypoints > All.RoutesA route is a path from one location to one or more destinations.Creating and Navigating a Route From Your PresentLocationYou can create and immediately navigate a route on theNavigation chart or the Fishing chart. This method does notsave the route or the waypoint data.1 From the Navigation chart or Fishing chart, select adestination.2 Select Navigate To > Route To.3 Select the location of the last turn before the destination.4 Select Add Turn.5 If necessary, repeat to add turns, working backward from thedestination to the present location of your vessel.The last turn you add should be the first turn you make,starting from your present location. It should be the turnclosest to your vessel.6 If necessary, select Menu.7 Select Done.8 Review the course indicated by the magenta line.9 Follow the magenta line, steering to avoid land, shallowwater, and other obstacles.Creating and Saving a RouteThis procedure saves the route and all the waypoints in it. Thestarting point can be your present location or another location.You can add up to 250 waypoints, or turns, to one route.1 Select Nav Info > Routes > New > Routes.2 Select the starting location of the route.3 Select Add Turn.4 Select the location of the next turn on the chart.5 Select Add Turn.The chartplotter marks the location of the turn with awaypoint.6 If necessary, repeat steps 4 and 5 to add more turns.7 Select the final destination.Viewing a List of Routes and Auto Guidance Paths1 Select Nav Info > Routes.2 If necessary, select Filter to see routes only or AutoGuidance paths only.Editing a Saved RouteYou can change the name of a route or change the turns theroute contains.1 Select Nav Info > Routes.2 Select a route.3 Select Review > Edit Route.4 Select an option:• To change the name, select Name, and enter the name.• To select a waypoint from the turn list, select Edit Turns >Use Turn List, and select a waypoint from the list.• To select a turn using the chart, select Edit Turns > UseChart, and select a location on the chart.Browsing for and Navigating a Saved RouteBefore you can browse a list of routes and navigate to one ofthem, you must create and save at least one route.1 Select Nav Info > Routes.2 Select a route.3 Select Navigate To.4 Select an option:• To navigate the route from the starting point used whenthe route was created, select Forward.• To navigate the route from the destination point usedwhen the route was created, select Backward.A magenta line appears. In the center of the magenta line isa thinner purple line that represents the corrected coursefrom your present location to the destination. The correctedcourse is dynamic, and it moves with your boat when you areoff course.5 Review the course indicated by the magenta line.6 Follow the magenta line along each leg in the route, steeringto avoid land, shallow water, and other obstacles.7 If you are off course, follow the purple line (corrected course)to go to your destination, or steer back to the magenta line(direct course).Browsing for and Navigating Parallel to a SavedRouteBefore you can browse a list of routes and navigate to one ofthem, you must create and save at least one route.1 Select Nav Info > Routes.2 Select a route.3 Select Navigate To.4 Select Offset to navigate parallel to the route, offset from itby a specific distance.5 Indicate how to navigate the route:• To navigate the route from the starting point used whenthe route was created, to the left of the original route,select Forward - Port.• To navigate the route from the starting point used whenthe route was created, to the right of the original route,select Forward - Starboard.• To navigate the route from the destination point usedwhen the route was created, to the left of the originalroute, select Backward - Port.• To navigate the route from the destination point usedwhen the route was created, to the right of the originalroute, select Backward - Starboard.6 If necessary, select Done.A magenta line appears. In the center of the magenta line isa thinner purple line that represents the corrected coursefrom your present location to the destination. The correctedcourse is dynamic, and it moves with your boat when you areoff course.7 Review the course indicated by the magenta line.8 Follow the magenta line along each leg in the route, steeringto avoid land, shallow water, and other obstacles.9 If you are off course, follow the purple line (corrected course)to go to your destination, or steer back to the magenta line(direct course).Deleting a Saved Route1 Select Nav Info > Routes.2 Select a route.Navigation with a Chartplotter 13