Garmin FORERUNNER 110 Owner's Manual

Also see for Forerunner 110: Important safety instructions Instructions Declaration of conformity Owner's manual

Contents

Forerunner 110 Owner’s ManualPutting on the Heart RateMonitornOte: If you do not have a heart ratemonitor, you can skip this section.Wear the heart rate monitor directly onyour skin, just below your breastplate.It should be snug enough to stay inplace during your run.1. Push one tab on the strap throughthe slot in the heart rate monitor.TabHeart Rate Monitor StrapHeart Rate Monitor (Front)SlotHeart Rate Monitor (Back)Electrodes2. Press the tab down.3. Wet both electrodes on the backof the heart rate monitor to createa strong connection between yourchest and the transmitter.4. Wrap the strap around your chestand attach it to the other side of theheart rate monitor.The Garmin logo should beright‑side up.After you put on the heart rate monitor,it is on standby and ready to send data.When the heart rate monitor is paired,a message appears, and appears onthe screen. For troubleshooting tips,see page 14.Going for a Run1. From the timer page, press start tostart the timer.History is only recorded while thetimer is running.