Garmin FUSION MS-RA210 Owner's Manual

DAB PlaybackWhen you connect a compatible Digital Audio Broadcasting (DAB) module and antenna, such as the MS-DAB100A to the RA210 stereo, you can tune in to and play DAB stations.DAB broadcasts are not available in all regions. When the stereo is not set to a compatible region, the DABsource is not available.Setting the Tuner RegionYou must select the region you are in to receive DAB stations properly.1 Select > SETTINGS.2 Select TUNER REGION.3 Select the region you are in.Scanning for DAB StationsBefore you can scan for DAB stations, you must connect a compatible DAB module and antenna (not included)to the stereo. Because DAB signals are broadcast in select countries only, you must also set the tuner region toa location where DAB signals are broadcast.1 Select the DAB source.2 Select to scan for available DAB stations.When scanning is complete, the first available station in the first ensemble found begins playing.NOTE: After the first scan is complete, you can select again to re-scan for DAB stations. When the re-scan is complete, the system starts playing the first station in the ensemble you were listening to when youstarted the re-scan.Changing DAB Stations1 Select the DAB source.2 If necessary, select to scan for local DAB stations.3 Select or to change the station.When you reach the end of the current ensemble, the stereo automatically changes to the first availablestation in the next ensemble.TIP: You can hold or to change the ensemble.Selecting a DAB Station from a List1 Select the DAB source.2 If necessary, select to scan for local DAB stations.3 Select > DAB > BROWSE > STATIONS.4 Select a station from the list.Selecting a DAB Station from a Category1 Select the DAB source.2 If necessary, select to scan for local DAB stations.3 Select > DAB > BROWSE > CATEGORIES.4 Select a category from the list.5 Select a station from the list.16 DAB Playback