Garmin Fishfinder 320C Owner's Manual And Reference Manual

Also see for Fishfinder 320C: Template manual Specifications Specifications

14Basic and Advanced Data FieldsThe top left of the screen contains configurable data fields for the sonar display. Pressing the DATA keywill allow you to toggle between a Basic and Advanced data field display. By default, the Basic display willshow the depth, water temperature and speed (depending on the Graph Tab settings and type of transducer/sensors attached). The Advanced display shows a larger, configurable data field with a white background.The Advanced data setup allows you to specify the type of data displayed and either a Narrow (Small) orWide (Larger) size format for each data field.The following selections require the proper NMEA data (see pgs. 3-4) in order to display information ina data field: Bearing, Compass, Course, Distance to Next, Off Course, Pointer, Position, Speed, Time Of Day,Track, Turn, VMG. NMEA Input/Output must also be enabled to receive this data. (see pg. 18)To toggle the data field display:1. Press and release the DATA key to alternate between the Basic and Advanced data field displays.To access the Advanced data setup:1. Hold down the DATA key to access the Advanced data setup screen. The left side of the screen will showthe current Advanced display layout. The right side will show available configuration options.You may either directly edit an existing field on the left or choose the type of data you wish to add fromthe list on the right. Highlighted items will appear with a black background and the associated field or datatype will be outlined in yellow and red.To modify or add a data field:1. Using the ARROW KEYPAD, press LEFT to modify an existing field or RIGHT to add a new one, then UPor DOWN to highlight the desired item. Press ENTER and the available options will appear on the rightside.2. Select an option from the list on the right and press ENTER. You may choose to display a ‘Wide’ or‘Narrow’ sized format (some data fields are only available in ‘Wide’ format and this option will be grayedout), arrange the display order with ‘Move Up’ or ‘Move Down’ (Narrow data fields will always arrangebelow Wide data fi elds), ‘Remove’ or ‘Replace’ the data fi eld. For ‘Replace’, choose a replacement itemfrom the list and press ENTER.3. When done, highlight ‘OK’ and press ENTER or press QUIT to exit the Advanced data field setup screen.Unit OperationUsing the DATA KeySonar Page WithAdvanced Data FieldAdding a Data FieldModifying a Data Field