Garmin G1000 Pilot’s Guide for the Beechcraft A36/G36 190-00595-00 Rev. A2-20FLIGHT INSTRUMENTSSYSTEM TIMEThe system time is displayed in the lower right corner of the PFD. Three display formats are available, local12-hr, local 24-hr, and Coordinated Universal Time (UTC). Time and date are obtained from the GPS satellitesand cannot be changed, although a time offset may be entered (±HH:MM) for local times.Figure 2-29 System TimeConfiguring the system time:1) Select the AUX - System Setup Page using the FMS Knob.2) Press the FMS Knob to activate the cursor.3) Turn the large FMS Knob to highlight the ‘Time Format’ field (Figure 2-31).4) Turn the small FMS Knob to select the desired format and press the ENT Key to confirm selection. The ‘TimeOffset’ field is highlighted.5) Use the FMS Knob to enter the desired time offset (±HH:MM) and press the ENT Key to confirm selection.Figure 2-30 System Setup Page,Display Units SettingsFigure 2-31 System Setup Page,Date/Time Settings
