Garmin G1000 Reference Manual

Also see for Cessna Caravan G1000: Cockpit reference guide Pilot's guide Pilot's guide Pilot's guide Pilot's guide

Contents

Garmin G1000 Reference Manual Manual pdf 37 page image

Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang190-00600-02 Rev. A 21Flight planningFlightInstruments EICASNav/Com/XPDR/Audio AFCS GPS NavFlightPlanning ProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/Alerts Appendix Index6) Enter the departure time. Press the ENT Key when finished. Departure timemay be entered in local or UTC time, depending upon system settings.7) Enter the fuel flow. Press the ENT Key when finished. Note that in ‘AUTOMATIC’page mode, fuel flow is provided by the system.8) The flashing cursor moves to the fuel onboard field. Modify the fuel onboard.Press the ENT Key when finished. In ‘AUTOMATIC’ mode, fuel onboard isprovided by the entry made on the Weight Planning Page.9) The flashing cursor moves to the calibrated airspeed field. Enter a calibratedairspeed. Press the ENT Key when finished.CreAte A neW user WAypoint1) Turn the large FMS Knob to select the ‘WPT’ page group.2) Turn the small FMS Knob to select the User WPT Information Page.3) Select the NEW Softkey. A waypoint is created at the current aircraftposition.4) Enter the desired waypoint name.5) Press the ENT Key.6) The cursor is now in the ‘REFERENCE WAYPOINTS’ field. If desired, thewaypoint can be defined by a reference waypoint. Use one of the followingmethods to enter the reference waypoint:a) Turn the small FMS Knob to the left to display a list of flight planwaypoints. This list is populated only when there is an active flightplan.b) Turn the large FMS Knob to select the desired waypoint.c) Press the ENT Key.Or:a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint listis displayed.b) Turn the small FMS Knob to the right to display the ‘NRST’ waypointsto the aircraft’s current position.c) Turn the large FMS Knob to select the desired waypoint.d) Press the ENT Key.Or: