Garmin G1000 Cockpit Reference Guide for the Piper PA-46 Meridian190-01842-00 Rev. AIndex139FlightInstruments EICASNav/Com/XPDR/Audio AFCS GPS NavFlightPlanning ProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/Alerts Appendix Index3) Turn the system ON. A prompt is displayed.4) Press the YES Softkey. The navigation database is copied to the SD card inthe bottom card slot of the MFD.5) After the navigation database files are copied to the bottom SD card, pressany key to verify, as instructed.6) After database verification is complete, press any key to continue asinstructed on the display.7) Press the NO Softkey. The display now starts in normal mode. Since thedatabase effective date is not yet valid, it should not be loaded as theactive database. The display now starts in normal mode. Do not removepower while the display is starting.8) Press the ENT Key to acknowledge the startup screen.9) Turn the large FMS Knob to select the AUX Page group on the MFD.10) Turn the small FMS Knob to select the System Status Page.11) The new database is copied to the SD card in the bottom card slot of eachPFD. Progress can be monitored in the SYNC STATUS field. When copyingis finished, ‘Complete’ is displayed.NOTE: During the synchronization process, version differences betweenstandby navigation databases will exist. This will result in the systemdisplaying a ‘DB Mismatch’ alert for the standby navigation databases. Thisalert will remain until the next power cycle.12) Turn system power OFF.13) Remove the SD card from the top card slot of the MFD.14) Turn system power ON.15) Press the ENT Key to acknowledge the startup screen.16) Turn the large FMS Knob to select the AUX Page group on the MFD.
