Garmin G3X Installation Manual

Also see for G3X Touch: Quick reference guide Installation manual Pilot's guide Pilot's guide Pilot's guide

Contents

Garmin G3X Installation Manual Manual pdf 270 page image

G3X Installation Manual - Connector Installation Instructions 190-01115-01Page 16-6 Rev. L16.3 Jackscrew Backshell Installation Instructions16.3.1 Shield Block Installation PartsTable 16-4 and Table 16-5 list the parts needed to install a Shield Block. Parts listed in Table 16-4 aresupplied in the LRU Connector Kits (see Table 1-11). Parts listed in Table 16-5 are to be provided by theinstaller.Table 16-4 Parts supplied for a Shield Block Installation (Figure 16-5)Figure Ref Description GPN or MIL spec1 Cast Backshell Housing 125-00175-006 Contacts 336-00094-0012 Clamp 115-01078-0413 Screw,4-40x.375,PHP,SS/P,w/Nylon 211-60234-1014 Cover 115-01079-0415 Screw,4-40x.187,FLHP100,SS/P,w/Nylon 211-63234-06Table 16-5 Parts not supplied for a Shield Block Installation (Figure 16-5)FigureRef Description GPN or MIL spec2 Multiple Conductor Shielded Cable (2-conductor shown in FigureB-1)Parts used depend onmethod chosen3 Drain Wire Shield Termination (method optional) Parts used depend onmethod chosen4 Braid, Flat (19-20 AWG equivalent, tinned plated copper strands36 AWG, Circular Mil Area 1000 -1300)Parts used depend onmethod chosen5 Floating Shield Termination (method optional) Parts used depend onmethod chosen7Ring terminal, #8, insulated, 18-22 AWG MS25036-149Ring terminal, #8, insulated, 14-16 AWG MS25036-153Ring terminal, #8, insulated, 10-12 AWG MS25036-1568 Screw, PHP, 8-32x.312", Stainless MS51957-42Screw, PHP, 8-32x.312", Cad Plated Steel MS35206-2429 Split Washer, #8, (.045" compressed thickness) Stainless MS35338-137Split Washer, #8, (.045" compressed thickness) Cad-plated steel MS35338-4210 Flat Washer, Stainless, #8, .032" thick, .174"ID, .375" OD NAS1149CN832RFlat washer, Cad-plated Steel, #8, .032" thick, .174"ID, .375" OD NAS1149FN832P11 Silicon Fusion Tape -