19G500 Cockpit Reference Guide190-01102-03 Rev CPRIMARY FLIGHT DISPLAY (PFD) PRIMARY FLIGHT DISPLAYThe following features are part of the Synthetic Vision Technology. For moredetails refer to the G500 Pilot’s Guide, Rev. C or later.Flight Path Marker• Airport Signs•Horizon Heading Marks• Runway Display•Terrain/Obstacle Display and Alerting• Water•Three-dimensional Traffic• Zero-Pitch Line•Wind Vectors• Altitude Minimums Bug•NOTE: SVT may be deactivated under certain conditions, such as lossof heading. Once condition is resolved, reactivate SVT, press the PFDsoft key followed by the SYN VIS soft key, then the SYN TERR soft key.NOTE: SVT features are not a substitute for standard course andaltitude deviation information using the CDI, VSI, and VDI.Displaying Garmin SVT™ TerrainPress the1) PFD soft key.Press the2) SYN VIS soft key.Press the3) SYN TERR soft key.Press the4) BACK soft key to return to the previous page.Displaying Heading on the HorizonPress the1) PFD soft key.Press the2) SYN VIS soft key.If not already enabled, press the3) SYN TERR soft key.Press the4) HRZN HDG soft key.Press the5) BACK soft key to return to the previous page.Displaying Airport SignsPress the1) PFD soft key.Press the2) SYN VIS soft key.If not already enabled, press the3) SYN TERR soft key.Press the4) APTSIGNS soft key.Press the5) BACK soft key to return to the previous page.