Garmin G500H Cockpit Reference Manual

Also see for G500H: Pilot's guide Reference guide Pilot's guide

Contents

Garmin G500H Cockpit Reference Manual Manual pdf 31 page image

21G500H Cockpit Reference Guide190-01150-03 Rev BMAP GROUP MAP GROUP: NAV PAGESDecluttering (DCLTR) the Map PagesThere are four levels of decluttering, DCLTR, DCLTR-1, DCLTR-2, andDCLTR-3. DCLTR shows the most detail while DCLTR-3 removes most detail.While viewing Navigation Map 1 or Navigation Map 2 page of the Map PageGroup, press the DCLTR soft key. Each successive press of the DCLTR soft keywill toggle through the declutter levels.Turning on Map OverlaysWhile viewing Navigation Map 1 or Navigation Map 2 of the Map Page Group,press the MAP soft key. Select the Traffic, TOPO, or Terrain overlays by pressingthe appropriate soft key.NOTE: The TOPO overlay and the TERRAIN overlay cannot be selectedor displayed on the same page.Measuring DistancesWhile viewing Navigation Map 1 or Navigation Map 2 of the Map Page1)Group, press MENU.Turn the large2) MFD knob or the small MFD knob to highlight “MeasureBearing/Distance” and then press ENT.Turn the large3) MFD knob or small MFD knob to move the map pointer. Thedistance, bearing, and coordinates are displayed at the top of the screen.Distance, Bearing and Coordinates Display Measuring Map PointerPress4) ENT to reset the distance and bearing values.Press the small5) MFD knob to stop measuring.