46G500H Cockpit Reference Guide 190-01150-03 Rev FAUX GROUPAUX GROUP: SYSTEM SETUP PAGESystem Setup PageSoft Keys Found on System Setup PageSetting Brightness and Mode1) While viewing the System Setup Page of the Aux Page Group, press the smallMFD knob. The LEVEL in the DISPLAY BRIGHTNESS box will flash.2) Turn the small MFD knob to brighten or dim the display.3) Press ENT when you reach the desired level.NOTE: When LEVEL is changed, the MODE defaults to MANUAL. IfMODE is set the AUTO, the LEVEL will adjust in response to ambientlight or a lighting bus, as configured during installation.Setting Airspeed References1) While viewing the System Setup Page of the Aux Page Group, press the smallMFD knob. Turn the large MFD knob to move to the desired field in theAIRSPEEDS box.2) Turn the small MFD knob to change the speeds and to also turn the speedsON or OFF. When the speeds are turned ON they are shown near the bottomof the Airspeed Tape if airspeed is zero.Airspeed ReferencesV Speed References on Airspeed TapeNOTE: At any time during the setting of your airspeed references,pressing the DFLT SPDsoft key will restore the unit to its initialconfiguration.
