Garmin GET 10, Engine Tilt Adapter Installation and Configuration Installation And Configuration Manual

Contents

Garmin GET 10, Engine Tilt Adapter Installation and Configuration Installation And Configuration Manual Manual pdf 1 page image

GET™ 10 Installation and Configuration InstructionsUse the Garmin® GET 10 adapter to adapt analog information provided by an engine-tilt sensoron your boat to your NMEA 2000® network. Your GET 10 adapter allows you to observeengine-tilt information on compatible Garmin display devices connected to your NMEA 2000network. For a list of compatible Garmin chartplotters and devices, visit www.garmin.com.Compare the contents of this package with the packing list on the box. If any pieces aremissing, contact your Garmin dealer immediately.Product RegistrationHelp us better support you by completing our online registration today. Go to http://my.garmin.com. Keep the original sales receipt, or a photocopy, in a safe place.Contact GarminContact Garmin Product Support if you have any questions while using your GET 10. In theUSA, go to www.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200 or(800) 800.1020.In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.In Europe, go to www.garmin.com/support and click Contact Support for in-country supportinformation, or contact Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241.See the Important Safety and Product Information guide in the compatible Garmin display device box forproduct warnings and other important information..Caution: Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, orsanding.notiCe: When drilling or cutting, always check the opposite side of the drilling or cuttingsurface.Needed Tools and SuppliesHeat-shrink tubing and a heat gunCable tiesAdditional NMEA 2000 cabling and connectors (optional)•••July 2009 190-01081-05 Rev. A Printed in Taiwan