Garmin GST 10, Water Speed and Temperature Adapter Installation and Configuration Installation And Configuration Manual

Contents

Garmin GST 10, Water Speed and Temperature Adapter Installation and Configuration Installation And Configuration Manual Manual pdf 1 page image

GST™ 10 Installation and Configuration InstructionsUse the Garmin® GST 10 sensor adapter to adapt analog information provided by a compatiblewater-speed sensor, water-temperature sensor, or combined water-speed and water-temperaturesensor on your boat to your NMEA 2000® network. Your GST 10 adapter allows you to observewater-speed and water-temperature information on the compatible Garmin display devicesconnected to your NMEA 2000 network. For a list of compatible Garmin chartplotters anddevices, visit www.garmin.com.The GST 10 adapter is compatible with the following water-speed and water-temperaturesensors:Garmin (Airmar ST850) thru-hull water-speed and water-temperature sensor (010-11413-00)Garmin (Airmar T80) water-temperature sensor (010-11413-01)Garmin transom-mount water-speed sensor (010-10279-02)These sensors are sold at your local Garmin dealer and are sold on the Garmin web site at www.garmin.com.Compare the contents of this package with the packing list on the box. If any pieces aremissing, contact your Garmin dealer immediately.Product RegistrationHelp us better support you by completing our online registration today. Go to http://my.garmin.com. Keep the original sales receipt, or a photocopy, in a safe place.Contact GarminContact Garmin Product Support if you have any questions while using your GST 10 adapter. Inthe USA, go to www.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200or (800) 800.1020.In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.In Europe, go to www.garmin.com/support and click Contact Support for in-country supportinformation, or contact Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241.See the Important Safety and Product Information guide in the compatible Garmin display device box forproduct warnings and other important information.Caution: Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, orsanding.notiCe: When drilling or cutting, always check the opposite side of the drilling or cuttingsurface.Needed Tools and SuppliesCable tiesAdditional NMEA 2000 cabling and connectors (optional)•••••July 2009 190-01081-07 Rev. A Printed in Taiwan