Garmin GFC 500 Maintenance Manual

Also see for GFC 500: Manual

Garmin GFC 500 Maintenance Manual Manual pdf 10 page image

GFC 500 Autopilot with ESP Part 23 AML STC Maintenance Manual Page 3190-02291-01 Revision 11.5 Units of MeasureUnless otherwise stated, all units of measure are English units.1.6 Reference PublicationsAll of the documents listed in Table 1-1 and Table 1-2 are available for download through theDealer Resource Center section of the Garmin web site. Refer to Section 1.7 for details.The documents listed in Table 1-1 are required by this maintenance manual to performmaintenance on the GFC 500 Autopilot. It is the responsibility of the owner/operator to ensurethat the latest versions of these documents are used during operation, servicing or maintenanceof the airplane. Note: There is a model-specific installation manual addendum for each modelcovered. Each has a different dash number. Refer to the Master Drawing List 005-01264-00 forapplicability.Table 1-1 – Required DocumentsDocument Number Title005-01264-00 Master Drawing List GFC 500 Autopilot with Electronic Stability and Protection Part 23AML STC190-02291-00 GFC 500 Autopilot with Electronic Stability and Protection Part 23 AML STC InstallationManual190-02291-XX GFC 500 Autopilot with Electronic Stability and Protection Part 23 AML STC Model-Specific Installation Manual Addendum190-01112-12 G5 Electronic Flight Instrument Pilot’s Guide for Certified AircraftThe documents listed in Table 1-2 are recommended to be available during the performance ofmaintenance activities.Table 1-2 – Garmin Reference DocumentsDocument Number Title190-01112-11 Garmin G5 Electronic Flight Instrument Part 23 AML STC Maintenance Manual190-02291-00 Garmin GFC 500 Autopilot with Electronic Stability and Protection Part 23 AML STCInstallation Manual190-01112-12 G5 Electronic Flight Instrument Pilot’s Guide for Certified AircraftTable 1-3 – Other Reference DocumentsDocument Number TitleAC 43.13-1B FAA Advisory Circular, Acceptable Methods, Techniques, and Practices– Aircraft Inspection and RepairAC 43.13-2B FAA Advisory Circular, Acceptable Methods, Techniques, and Practices– Aircraft AlterationsSAE ARP1870 Aerospace Systems Electrical Bonding and Grounding for Electromagnetic Compatibilityand SafetySAE AS4461 Assembly and Soldering Criteria for High Quality/High Reliability Soldered Wire andCable Termination in Aerospace VehiclesSAE AS50881 Wiring, Aerospace VehicleASTM F 2490-05 Standard Guide for Aircraft Electrical Load and Power Source Capacity Analysis