Garmin GMI 10 Quick Start Manual
Also see for GMI 10: Quick start manualInstallation instructionsTemplateInstructionsInstallation instructions
                    | |
1 GMI 10 Quick Start ManualAlarms and MessagesBattery Voltage—alarm – the battery voltage is at or below the specifiedvalue.Boat is not Moving Fast Enough to Calibrate—water speed calibration– the boat is moving too slow to calibrate.Connection with NMEA 2000 device lost—the GMI 10 has lost connectionwith a NMEA 2000 device.Deep Water—alarm – the boat has entered water deeper than the specifieddepth.Entering Target Surface Temperature—the water temperature is insidethe user-defined target temperature zone.Leaving Target Surface Temperature—the water temperature is outsidethe user-defined target temperature zone.Lost Satellite Reception—a connected GPS antenna has lost satellitereception.NMEA Depth Is Below Transducer—the NMEA depth input is using theDBT sentence which does not include keel offset. |
Related manuals for Garmin GMI 10
Garmin GMI 10 Quick Start Manual
Garmin Ghc 10 Quick Start Manual
Garmin FISHFINDER 300C Quick Start Manual
Garmin GMI 20 Owner's Manual
Garmin 400C Quick Reference Manual
Garmin GMI 10 Installation Instructions Manual
Garmin VHF 200 Quick Reference Manual
Garmin 30 Owner's Manual
Garmin GHP 10 Installation Instructions Manual
Garmin GHC 20 Owner's Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine