Garmin GNS 430 Operating Manual

Also see for GNS 430: Specification Pilot's manual Instructions Pilot's guide addendum Pilot's guide addendum

Contents

Garmin GNS 430 Operating Manual Manual pdf 13 page image

3.2 WPT PAGE GROUPThis second page group provides information for thousands of airports, VORs, NDBs,intersections, runways, frequencies, and procedures.To quickly select a WPT page:1. From any page, press and hold the CLR Key to select the Default NAV Page.2. Turn the large right knob to select the WPT Page Group. ‘WPT’ appears in thelower right corner of the screen.3. Turn the small right knob to select the desired WPT page. The WPT PageGroup includes seven pages. While viewing any WPT page, turn the small rightknob to select a different WPT page. The first four pages provide detailedinformation for the selected airport: location, runways, frequencies andapproaches. The last three pages provide information for intersections, NDBsand VORs. After a WPT page is selected, information for a waypoint may beviewed by entering the identifier (or name) of the desired waypoint. Airports,NDBs, and VORs may be selected by identifier or facility name.To enter a waypoint identifier:1. Select the desired WPT page and press the small right knob to activate thecursor.2. Turn the small right knob to select the first character of the waypoint’sidentifier. Once the first character is flashing you can use the PC keyboard toenter an identifier.3. Turn the large right knob to select the next character field.4. Turn the small right knob to select the desired character.5. Repeat steps 3 and 4 until the identifier is selected, then press the ENT Key.6. To remove the flashing cursor, press the small right knob.