APPENDIX C: SENSOR CONFIGURATION SOFTWARESNSRCFG configures the GPS sensors based on user-selected parameters. Some application featuresinclude the ability to download GPS sensor configuration, maintain different configurations in files, andperform GPS sensor configurations quickly with the use of one function key.This section provides a brief overview of the Sensor Configuration Software. Refer to this section whenusing the software to configure your Garmin sensor.Downloading the Sensor Configuration SoftwareThe Garmin Sensor Configuration Software (SNSRCFG.exe) is availablefrom the Garmin Web site. To download the software, start athttp://www.garmin.com/oem, select the GPS 10x, and then select SoftwareUpdates. The Garmin Sensor Configuration Software (SNSRCFG.exe) isincluded in the software update download.Selecting a ModelAfter opening the program (snsrcfg.exe), the following screen appears. Select the radio button next to thetype of Garmin sensor you are configuring.Connecting to the SensorAfter selecting the type of sensor, the following window opens. This is the Main Interface Screen for theprogram. To configure your sensor, you must first connect to the sensor.1. Select Config > Switch toNMEA Mode (or press theF10 key).2. Select Comm > Setup toopen the Comm SetupWindow.3. Select the Serial Port towhich the sensor isconnected. Select Auto tohave the programautomatically determine theBaud Rate, or selectManual to manually selectthe Baud Rate of the GPS10x. Click OK when done.4. Click the Connect icon ,or select Comm >Connect.5. To view the currentprogramming of the sensor,select Config > GetConfiguration from GPS(or press the F8 key). Thecurrent programming of thesensor is displayed in thewindow shown to the right.190-00769-00 GPS 10x Technical Specifications Rev. APage 19