Garmin GPS 155TSO Owner's Manual

Contents

Garmin GPS 155TSO Owner's Manual Manual pdf 76 page image

When an arrival airport is selected with the direct-to key (or created and activatedin a route to the arrival airport), the approaches for your arrival airport become avail-able through the Approach Select page, which can be viewed by pressing R androtating the outer knob. Remember that an airport must be the last waypoint in aroute to select an approach.To select an approach:1. Select the destination airport using the D key, orcreate and activate a route to the destination airport (see Section 3).2. Press R and rotate O to display the approach select page.3. Rotate K (or O with the cursor active) to display the desired approach procedure.4. Press C (if necessary) and rotate O until the desired approach flashes.5. Press E to select the approach.If an approach procedure has more than one Initial Approach Fix (IAF), you’llneed to select the desired IAF identifier for your approach.To select an IAF:1. Rotate O until the desired IAF flashes.2. Press E.Once the IAF is selected, the approach waypoints will be inserted into Route 0,replacing the destination airport, and the Active Route page will be displayed. Toreview the active route, rotate the K knob. The scrolling arrow prompt will indicatewhich direction to scroll to view additional waypoints, while the ‘if’, ‘ff’ and ‘mp’ des-ignators will indicate the IAF, FAF and MAP respectively.66APPROACH NAVIGATIONSelecting an ApproachSelect the Initial Approach Fix.Select the approach.Once the approach is loaded, the active route pagewill appear.