Garmin GPS 35 LP Technical Specification

Also see for GPS 35 LP: Declaration of conformity Quick start guide Technical specification

Contents

<8> Longitude, dddmm.mmmm format (leading zeroswill be transmitted)<9> Longitude hemisphere, E or W<10> Mode, M = manual, A = automatic<11> Fix type, 0 = no fix, 1 = 2D fix, 2 = 3D fix<12> Speed over ground, 0 to 999 kilometers/hour<13> Course over ground, 0 to 359 degrees, true<14) Position dilution of precision, 0 to 9 (rounded tonearest integer value)<15> Time dilution of precision, 0 to 9 (rounded to nearestinteger value)4.2.13 Sensor Status Information ($PGRMT GARMINproprietary format)The $PGRMT sentence gives information concerning thestatus of the GPS 35/36. This sentence is transmitted onceper minute regardless of the selected baud rate.$PGRMT,<1>,<2>,<3>,<4>,<5>,<6>,<7>,<8>*hh<1> Product, model and software version, this is avariable length field. (NOTE: Since the GPS 35/36utilizes a GPS 25 sensor board, the GPS 25 modeldescription will appear in this field.)<2> Rom checksum test, P = pass, F = fail<3> Receiver failure discrete, P = pass, F = fail<4> Stored data lost, R = retained, L = lost<5> Real time clock lost, R = retained, L = lost<6> Oscillator drift discrete, P = pass, F = excessivedrift detected<7> Data collection discrete, C = collecting almanac,null if almanac is current<8> Unit temperature in degrees C<9> Board configuration data, R = retained, L = lost4.2.14 3D velocity information ($PGRMV GARMINproprietary format)The $PGRMV sentence reports three-dimensional velocityinformation.28