Garmin GPS 400W Installation Manual

Also see for GNC 420AW: Maintenance manual Pilot's guide addendum Quick reference guide Pilot's Guide & Reference Pilot's Guide & Reference

Contents

Garmin GPS 400W Installation Manual Manual pdf 119 page image

400W Series Installation Manual Page 8-1190-00356-02 Rev. A8. PERIODIC MAINTENANCE8.1 Equipment CalibrationNo scheduled servicing tasks are required on the 400W Series unit.8.2 VOR ChecksRefer to CFR 14 paragraph 91.171. Every 30 days verify the limits of the permissible indicated bearingerror.8.3 CleaningThe front bezel, keypad, and display can be cleaned with a soft cotton cloth dampened with clean water.DO NOT use any chemical cleaning agents. Care should be taken to avoid scratching the surface of thedisplay.8.4 Battery ReplacementThe 400W Series unit includes an internal battery that will last 5 to 8 years. The battery is used for internaltime clock and GPS system information. Regular planned replacement is not necessary. The 400W Seriesunit will display a “Low Battery” and “Unit Needs Service” message when replacement is required. Oncethe low battery message is displayed, the battery should be replaced within 1 to 2 months.If the battery is not replaced and becomes totally discharged, the 400W Series unit will remain fullyoperational, but the GPS signal acquisition time will be increased. There is no loss of function or accuracyof the 400W Series unit with a dead battery.The battery is not user replaceable. To replace the battery, contact the Garmin repair station or factoryauthorized repair station.