Garmin GPS 500 Quick Reference

Also see for GPS 500: Instructions Pilot's guide addendum Pilot's guide addendum Installation manual Pilot's guide addendum

Contents

Garmin GPS 500 Quick Reference Manual pdf 8 page image

8Default NAV PageThe following symbols are used directly above the graphic CDI todepict the “active leg” of a flight plan or direct-to:Course to a Waypoint, or Desired Course between Two WaypointsDirect-To a Waypoint Vectors-To-FinalLeft Procedure Turn Right Procedure TurnDME Arc to the Left DME Arc to the RightLeft-Hand Holding Pattern Right-Hand Holding PatternTo Quickly Display the Default NAV Page1. From any page, press and hold CLR for approximately two seconds.Active Leg ofFlight Plan, orDirect-to DestinationUser-selectableData Fields(all four corners)Course DeviationIndicator (CDI)To/FromFlagTo Select a Different Data Item for any Data Field1. With the Default NAV page displayed,press the MENU key to display an optionsmenu.2. Rotate the large right knob tohighlight the “Change Fields?” option, andpress ENT to select this option.3. Use the large right knob to highlightthe data field you wish to change.4. Rotate the small right knob to displaya list of available data items. Continuerotating the small right knob to selectthe desired data item from the list.5. Press ENT to select the desired data itemand return to the Default NAV page.6. Press the small right knob to removethe cursor from the page.Default Nav Page