Garmin GPS 72 Owner's Manual

Also see for GPS 72: Safety and product information Declaration of conformity Specification sheet Quick start guide Owner's manual & reference guide

Garmin GPS 72 Owner's Manual Manual pdf 30 page image

IntroductionReference•‘Use Map’ to project a waypoint — When ‘Use Map’ is selected, the unit will show amap page. Use the ROCKER to move the Map Pointer to the desired reference loca-tion and then press ENTER. On the Project Location page, enter a new bearing anddistance. When you have finished, highlight ‘Save’ and press ENTER. This will returnyou to the Mark Waypoint page. The waypoints location will have changed, reflectingthe projected bearing and distance from your reference point. To save the waypoint,highlight’OK’ and press ENTER.• ‘Use Points Menu’ to project a waypoint — When ‘Use Points Menu’ is selected, theunit will display the Points Menu. You can now select any point that is available fromthe waypoints list or any MapSource data that may be loaded in the unit. On theProject Location page, enter a new bearing and distance. When you have finished,highlight ‘Save’ and press ENTER. This will return you to the Mark Waypoint page.The waypoint’s location will have changed, reflecting the projected bearing and distancefrom your reference point. To save the waypoint, highlight ’OK’ and press ENTER.Delete Waypoint — This option will delete the waypoint that is currently displayed.After selecting this option a conformation window will be displayed. With ‘Yes’ high-lighted, press ENTER to delete the waypoint.Append to Route — This option will add the new waypoint to an exisiting or new route.•Add waypoint to an existing route — A list of existing routes will be displayed when‘Append to Route’ is selected. Select the desired route from the list and press ENTER.Append to Route ListCreating Waypoints