Garmin GPS 92 Owner's Manual & Reference

Also see for GPS 92: Declaration of conformity Specifications

Contents

Active Route PageOnce a route has been activated, the active route pagewill appear, displaying the waypoint sequence of yourroute with the estimated time enroute (ETE) at your pre-sent speed and distance to each waypoint. As long as youare navigating an active route, the active route page willbecome part of the main page sequence of the unit.The active route page will also allow you to changethe ETE field to display desired track (DTK) or estimatedtime of arrival (ETA) for each leg. You can also clear orinvert the active route.To display DTK or ETA for each leg:1. Highlight the ‘ETE’ field and press E.2. Use the up or down arrow keys to select ‘DTK’ or ‘ETA’and press E.To invert a route from the active route page:1. Press the up arrow key once to move the field highlightto the ‘INV?’ field.2. Press E to invert the route.To clear the active route from the active route pageand stop route navigation:1. Use the arrow keys to select the ‘CLR?’ field.2. Press E. Highlight the ‘Yes?’ prompt on the warningpage and press E to complete.Reviewing & Editing RoutesOnce a route has been created and stored in theGPS 92, it can be edited at any time—even as an activeroute.To edit a route from the active route page or theroute submenu page:1. Use the up and down arrow keys to highlight the way-point to edit and press E.An on-screen menu of editing choices will appear,with options for reviewing, inserting, removing or chang-ing the waypoint field highlighted. Use the up and downarrow keys to select from the editing choices.Active Route PageUse the active route page tokeep track of the estimatedtime enroute and distance toupcoming waypoints.The active route page canbe configured to display theETA for each route way-point.Active RoutePageReference36