A BTrack Log SubmenuThe Main Menu Page’s track submenu lets you specify whether or not to recorda track plot (an electronic recording of your path) and define how it is recorded. Italso provides an indicator of the track memory used and selects functions to clearthe track memory and start a TracBack route. The following functions are available:• Record Mode— lets you select one of three track recording options:• Off– No track log will be recorded. Note that selecting the ‘Off’ settingwill prevent you from using the TracBack feature.• Fill– a track log will be recorded until the track memory is full.• Wrap– A track log will be continuously recorded, wrapping through theavailable memory (replacing the oldest track data with new data).• Interval— defines the frequency with which the track plot is recorded. Three inter-val settings are available:• Time– records track plot based on a user-defined time interval.• Resolution– records track plot based upon a user-defined variance fromyour course over ground. The resolution option is the default setting andis recommended for the most efficient use of memory and TracBack per-formance. The distance value (entered in the interval field) is the maxi-mum error allowed from the true course before recording a track point.• Distance– records track based on a user-defined distance between points.• Interval Value— defines the distance or time used to record the track log.• Delete Track?— allows you to clear the track log currently stored in memory.• Start TracBack?— converts the current track log into an inverted route and beginsroute navigation along the track log.To reset all track options to the default settings:1. Press O, followed by T.55A. The ‘Wrap’ option will continuously record a tracklog, and replace the oldest track log point with newdata. The ‘Fill’ option will record a track log untilthe memory is full.B. The track submenu’s default settings may be quick-ly restored from the track options page.SECTION9SETUP MENUSTrack Log Setup