Garmin GPSMAP 235 Sounder Owner's Manual

Also see for GPSMAP 235 Sounder: Specification

Garmin GPSMAP 235 Sounder Owner's Manual Manual pdf 16 page image

6GETTING STARTEDUsing the GOTO KeyA BMarking a PositionTo mark your present position:1. Press the M key. The mark position page will appear, with a default three-digitwaypoint name, symbol, position, and depth.2. Use the R keypad to highlight the waypoint name field (001) and press T.3. Press the LEFT ARROW of the R keypad to clear the name field.4. Use the R keypad to enter the name ‘DOCK,’ using the UP and DOWN arrows to selecteach letter, and the RIGHT arrow key to advance to the next character position. If youmake a mistake and select an incorrect character, simply use the LEFT arrow key of theR keypad to backspace the cursor and correct the entry.5. Press T to confirm the name.6. The field highlight will advance to the symbol field. Press T to access the waypointsymbol page.7. Use the R keypad to highlight the ANCHOR symbol.8. Press T to confirm the symbol.9. Press T again to confirm the ‘DONE?’ prompt and save the waypoint.The DOCK waypoint is now stored in memory. Waypoints can also be createdgraphically from the map display, by manually entering position coordinates, or asunderwater waypoints from the Sounder Page. Each of these techniques isdescribed in the reference section of the manual or in the quick reference guide.To continue our tour, let’s move on to the Sounder Page.1. Press the J key to access the Sounder Page.GETTING STARTEDMarking a PositionA. The mark position page will automatically assigna default, three-digit name for each waypoint,which can be changed at any time to an alphanu-meric name containing up to six-characters.B. A complete set of waypoint symbols allows you tomark inland and offshore waypoints with a cus-tom symbol for fast waypoint recognition.