12 GPSMAP 3006C/3010C Owner’s ManualBASIC OPERATION > U SING THE GPSMAP 3006C/3010CAs you move the map pointer, the distance and bearing from your currentlocation to the map pointer are shown in the upper-left corner of the map, withthe map pointer’s location coordinates. Keep in mind that when the map pointeris stationary, the distance and bearing from your present location changes as yourboat moves. The map pointer can also be used to snap to on-screen waypoints andmap items, allowing you to review a selected location directly from the map.To select an on-screen waypoint or map item with the map pointer:1. Use the ROCKER to move the pointer to the waypoint or map item. Whena waypoint or map item is selected, it is highlighted on-screen with thename and location shown.2. Press ENTER to view details of the map item. When using BlueChart orMapSource data, or if waypoints are grouped tightly together due to theRange setting, additional tabs appear on the Review Waypoint Page. Usethe ROCKER to highlight the individual tabs to view the information andadditional options.AdditionalinformationtabsMapwindowTo eliminate the pointer and re-center your location on the map:Press QUIT.To view additional BlueChart chart notes:1. Select an on-screen BlueChart map item, and press ENTER.2. Use the ROCKER to highlight the Chart tab. A chart summaryappears below the tab.3. Highlight the Notes soft key, and press ENTER. Notes for the chartappear.BlueChart Notes4. Highlight the notes field, and press ENTER.5. Use the ROCKER to scroll the text up or down.6. Press QUIT to exit.
