Garmin GPSMAP 3206 Owner's Manual

Also see for GPSMAP 3206 - Marine GPS Receiver: Installation instructions Install guide Installation instructions Important safety information Quick reference guide

Contents

Garmin GPSMAP 3206 Owner's Manual Manual pdf 99 page image

GPSMAP 3206/3210 Owner’s Manual 1usIng radar > radar PageradarRadar PageWith the radar properly installed, when you turn on your GPSMAP 3206/3210, itshould detect the radar as a new network connection.NOTE: A software update may be needed for the radar to function properly.If the message “Incompatible Software Version” appears when you turn on theGPSMAP 3206/3210, you must update your GPSMAP 3206/3210 software. Asoftware update card is provided with the radar.When the new radar is detected, the Radar Page is added to the page sequence.If the Radar Page is not available, press and hold ADJ/MENU to open the MainMenu. Highlight the System tab, and select Radar from the Services list at thebottom of the page.To view the Radar Page:Press PAGE repeatedly until the Radar Page appears.Radar PageConfiguring the Radar PageYou can customize the appearance of the Radar Page. See “Configuring Main Pages”on page 33 for more information.To add or remove functions on the Radar Page:1. Open the Radar Page, and then press and hold the DATA/CNFG key toopen the Configuration window.2. Using the ROCKER, highlight the function you want to add or remove, andpress ENTER. Only functions with a check mark in the check box next tothem appear on the Radar Page.