GPSMAP® 4000/5000 Series Owner’s Manual 2Viewing InformationVieWinGinformationDSC Log—view a list of all DSC calls, sorted by most recent, sender, or by type (distress calls orposition reports).View By time—view the most recent DSC calls received, sorted and displayed chronologicallyby time and date. Calls with identical time and date information show the same information in thelist.View By Sender—view an alphanumerical list of senders.View By Type—view the most recent distress calls or position reports, sorted chronologically.Delete All—delete all log entries.DSC Call List—view the 100 most-recent calls. The DSC Call List shows the most-recent call froma boat. If a second call is received from the same boat, it replaces the first call in the Call List.Directory—view a list of all DSC entries. You can view by name or by MMSI. You can also add anentry.Viewing Engine GaugesTo view analog or digital engine gauges from the Home screen, select Information > Gauges >Engine.NOtE: You must be connected to a NMEA 2000 network capable of sensing engine data to view thegauges. See the GPSMAP 4000/5000 Series Installation Instructions for details.To select analog or digital gauges:1. While viewing the Gauges screen, press MENU.2. Select Gauge Setup to select the number of engines (1–4), and the number of fuel tanks (1 or2), and to reset the odometer to zero.NOtE: For more than two engines, you can only use the digital gauges. For one or two engines, youcan switch between analog and digital gauges.Viewing Fuel GaugesTo view fuel gauges from the Home screen, select Information > Gauges > Fuel. Fuel flow foreach engine, total fuel flow, fuel level in each tank, total fuel remaining, fuel economy, and the rangefor your boat are shown.NOtE: To view fuel information, your unit must be connected to an external fuel sensor, such as theGarmin GFS 10.••••