GPSMAP® 4000/5000 Series Owner’s Manual 2VIeWInG InformatIonVIeWInGI nformatIonView By Type—view the most recent distress calls or position reports, sorted chronologically.Delete All—delete all log entries.DSC Call List—view the 100 most recent calls. The DSC Call List shows the most recent call froma boat. If a second call is received from the same boat, it replaces the first call in the Call List.Directory—view a list of all DSC entries. You can view by name or by MMSI. You can also add anentry.Viewing GaugesTo view analog or digital engine gauges, from the Home screen, select Information > Gauges.NOtE: You must be connected to a NMEA 2000 network capable of sensing engine data to viewthe gauges. For more information on supported NMEA 2000 PGN information, see page 48.To select analog or digital gauges:1. While viewing the Gauges screen, press MENU.2. Select Gauge Setup to select the number of engines (1 - 4), number of fuel tanks (1 or 2),and to reset the odometer to zero.NOtE: For more than two engines, you can only use the digital gauges. For one or two engines,you can switch between analog and digital gauges.Viewing VideoYour unit can display video if you connect to a video source using the supplied video cable. See theGPSMAP 4000/5000 Series Installation Instructions for details.To view video from the Home screen, select Information > Video.Select Menu to setup the following:Source—select the video device (1 or 2) to use to display video. If you have two videosources and want to alternate between the two, select Alternate to define the amount of timeeach video is displayed.Aspect—switch between the standard aspect ratio and a stretched aspect ratio. The videocannot be stretched beyond the dimensions provided by the connected video device. Becauseof this, the stretched video may not fill the entire screen of the GPSMAP 4012/5012.Brightness—adjusts the brightness of the video feed up or down, or select Auto to allow theunit to automatically adjust the brightness.•••••