4 GPSMAP 4000 Series Owner’s ManualGettInG StartedGettinGS tarted To turn the Simulator Mode on:From the Home screen select Configure > System > Simulator > On.Select Setup to set speed, track control (simulated heading), position, simulator time, andsimulator date.Understanding the Home ScreenUse the Home screen to access all other screens.NOTE: Options on this screen vary based on the unit type and optional connected network devices.Charts—provides Navigation chart, Mariner’s Eye, Mariner’s Eye 3D, Fish Eye 3D, FishingChart, and Radar Overlay (page 5).NOTE: Mariner’s Eye 3D, Fish Eye 3D, and Fishing Charts are available only if you use a BlueChartg2 Vision SD card.Radar—sets up and displays radar (only available if the unit is connected to a radar module)(page 39).Sonar—sets up and provides sonar information (only available if the unit is connected to aGarmin sonar module) (page 44).Weather—sets up and displays various weather parameters, including precipitation, forecast,fishing, sea conditions, and visibility (only available if the unit is connected to a weather moduleand you have an XM subscription) (page 48).Combinations—sets up the screen to view a chart, sonar, radar, and video in a 2 or 3-field splitscreen (page 18).Where To?—provides navigation features (page 20).Information—shows information including tides, currents, celestial data, user data, informationabout other boats, gauges, and video (page 26).Configure—allows you to view and edit your unit and system settings (page 31).••••••••www.reelschematic.comwww.reelschematic.com