Garmin GPSMAP 5000 Owner's Manual

Also see for GPSMAP 4008 - Marine GPS Receiver: Technical reference Important safety information Owner's manual Supplement Owner's manual

Contents

getting started

Garmin GPSMAP 5000 Owner's Manual Manual pdf 2 page image

IntroductionThe 4000/5000 Series RF Remote is for use with the following Garmin chartplotters:GPSMAP 4008 GPSMAP 5008GPSMAP 4012 GPSMAP 5012GPSMAP 4208 GPSMAP 5208GPSMAP 4212 GPSMAP 5212The remote is used to control the 4000/5000 screens. It can be used up to 10 meters (32 feet) from thechartplotter and does not need to be pointed directly at your chartplotter.The remote operates on two AAA batteries (not included). To replace the batteries, use a small Phillipsscrewdriver to open the access cover on the rear panel. Use alkaline batteries for best results.Ensure your chartplotter has the current software, available at www.garmin.com.Description of ButtonsPairing buttons—press and hold to pair aremote with a chartplotter. Press and release toselect a paired chartplotter.Rocker—press up, down, left, and right to movethe map pointer and enter data.SELECT—press to confirm messages and selectitems.MENU—press to view additional options onmost screens.LOCK—press to lock all remote functions.Press again to unlock. The remote beeps when itis locked and a button is pressed.MOB (Man Overboard)—press to mark yourcurrent location as a Man Overboard point.HOME—press at any time to return to theHome screen.MARK—press to mark your current location asa waypoint.Up/Down—press to highlight menu items.Range (+/-)— press up (+) and down (-) to increase and decrease the map zoom scale.••••Getting StartedUse one of the three pairing buttons to pair your remote with a specific chartplotter. If you have more thanone chartplotter, this allows you to separately control up to three chartplotters.To allow wireless connections on your chartplotter:1. From the Home screen, select Configure > Communications > Wireless Devices.2. Set Allow New Connections to Yes.To pair the remote with a chartplotter:1. Press and hold one of the Pairing Buttons until “New Wireless Remote Found” appears on thechartplotter.2. Select Connect on your chartplotter.To select a chartplotter, press and release the Pairing Button that is paired with the chartplotter you want tocontrol.SpecificationsSize: 135 mm H x 50 mm W x 25.7 mm D (5.3" x 2" x 1")Weight: 77 g (2.7 oz), without battery101 g (3.6 oz), with batteriesCase: waterproof to IEC 529-IPX-7Frequency: 2.46 GHzMax Range: 10 m (32 ft); this value may vary slightly,depending on the installation of the chartplotterBattery Life: 100 days when used 15 minutes per day3 years shelf lifeOperating Temperature Range: -15°C to 70°C(5°F to 158°F)Storage Temperature Range: -40°C to 85°C(-40°F to 185°F)••••••••PairingbuttonsRange (+/-)RockerUp/DownMARKHOMEMOB(Man OverBoard)SELECTMENULOCK

/ 2

Related manuals for Garmin GPSMAP 4008 - Marine GPS Receiver