GPSMAP® 6000/7000 Series Owner’s Manual 25Charts and 3D Chart ViewsFishing ChartUse the Fishing chart for a detailed view of the bottom contours and depth soundings on the chart.Fishing Chart Navigation ChartThe Fishing chart uses detailed bathymetric data on a preprogrammed BlueChart g2 Vision data card, and isbest for offshore deep-sea fishing.Fishing Chart AppearanceUsing WaypointsSee “Waypoints” (page 34).Using TracksSee “Tracks” (page 39).Showing Other VesselsSee “Configuring the Appearance of Other Vessels” (page 66).Showing NavaidsFrom the Home screen, select Charts > Fishing Chart > Menu > Navaids > on.Showing Data BarsSee “Data Bars” (page 62).Showing Satellite Imagery on the Navigation ChartYou can overlay high-resolution satellite images on the land, on the sea, or on both portions of the Navigationchart when using a preprogrammed BlueChart g2 Vision data card.Note: When enabled, the high-resolution satellite images are only present at lower zoom levels. If youcannot see the high-resolution images in your BlueChart g2 Vision region, you can zoom in further byselecting the Range (+) key (GPSMAP 6000 series) or the button (GPSMAP 7000 series). You also canset the detail level higher by changing the map zoom detail (page 11).1. From the Home screen, select Navigation Chart > Menu > Chart Setup > Photos.2. Complete an action:• Select Land only to show standard chart information on the water, with photos overlaying the land.• Select Photo Map to show photos on both the water and the land at a specified opacity. Select andhold Up or Down to adjust the photo opacity. The higher you set the percentage, the more the satellitephotos cover both land and water.