Garmin GPSMAP 66 Owner's Manual

Also see for GPSMAP 66: Owner's manual Owner's manual Owner's manual Owner's manual

Contents

Garmin GPSMAP 66 Owner's Manual Manual pdf 15 page image

• Product registrationSetting Up Garmin Express1 Connect the device to your computer using a USB cable.2 Go to garmin.com/express.3 Follow the on-screen instructions.Registering Your DeviceHelp us better support you by completing our online registrationtoday. Keep the original sales receipt, or a photocopy, in a safeplace.1 Go to www.garmin.com/express.2 Sign in to your Garmin account.Attaching the Carabiner Clip1 Position the carabiner clip À in the slots on the mountingspine Á of the device.2 Slide the carabiner clip up until it locks in place.Removing the Carabiner ClipLift up on the bottom of the carabiner clip, and slide thecarabiner clip off the mounting spine.Attaching the Wrist Strap1 Insert the loop of the wrist strap through the slot in thedevice.2 Thread the other end of the strap through the loop, and pull ittight.Device CareNOTICEAvoid chemical cleaners, solvents, and insect repellents that candamage plastic components and finishes.Do not store the device where prolonged exposure to extremetemperatures can occur, because it can cause permanentdamage.The device is water resistant to IEC Standard 60529 IPX7. It canwithstand accidental immersion in 1 meter of water for 30minutes. Prolonged submersion can cause damage to thedevice. After submersion, be certain to wipe dry and air dry thedevice before using or charging.Thoroughly rinse the device with fresh water after exposure tochlorinated or salt water environments.Cleaning the DeviceNOTICEEven small amounts of sweat or moisture can cause corrosionof the electrical contacts when connected to a charger.Corrosion can prevent charging and data transfer.1 Wipe the device using a cloth dampened with a milddetergent solution.2 Wipe it dry.After cleaning, allow the device to dry completely.TIP: For more information, go to .Data ManagementNOTE: The device is not compatible with Windows 95, 98, Me,Windows NT®, and Mac OS 10.3 and earlier.File TypesThe handheld device supports these file types.• Files from BaseCamp or HomePort™. Go to www.garmin.com/trip_planning.• GPX track files.• GPX geocache files. Go to www.garmin.com/geocache.• GGZ geocache files. Go to www.garmin.com/geocache.• JPEG photo files.• GPI custom POI files from the Garmin POI Loader. Go towww.garmin.com/products/poiloader.Installing a Memory CardWARNINGDo not use a sharp object to remove user-replaceable batteries.You can install a microSD memory card in the handheld devicefor additional storage or pre-loaded maps.1 Turn the D-ring counter-clockwise, and pull up to remove thecover.2 Remove the batteries.3 Slide the card holder À to and lift up.4 Place the memory card with the gold contacts facing down.5 Close the card holder.6 Slide the card holder to to lock it.7 Replace the batteries and cover.Connecting the Device to Your ComputerNOTICETo prevent corrosion, thoroughly dry the USB port, the weathercap, and the surrounding area before charging or connecting toa computer.Before you can operate your device while connected to yourcomputer, you must install batteries. The computer USB portmay not provide enough power to operate the device.1 Pull up the weather cap from the mini-USB port.2 Plug the small end of the USB cable into the mini-USB port.3 Plug the large end of the USB cable into a computer USBport.Device Information 11