2 If necessary, select a field to make changes to the waypoint.3 Select Save.Navigating to a Waypoint1 Select FIND > Waypoints.2 Select a waypoint.3 Select Go.Editing a Waypoint1 Select Waypoint Manager.2 Select a waypoint.3 Select an item to edit, such as the name.4 Enter the new information, and select Done.Deleting a Waypoint1 Select Waypoint Manager.2 Select a waypoint.3 Select MENU > Delete.Waypoint AveragingYou can refine a waypoint location for more accuracy. Whenaveraging, the device takes several readings at the samelocation and uses the average value to provide more accuracy.1 Select Waypoint Manager.2 Select a waypoint.3 Select MENU > Average Location.4 Move to the waypoint location.5 Select Start.6 Follow the on-screen instructions.7 When the confidence status bar reaches 100%, select Save.For best results, collect four to eight samples for the waypoint,waiting at least 90 minutes between samples.Projecting a WaypointYou can create a new location by projecting the distance andbearing from a marked location to a new location.1 Select Waypoint Manager.2 Select a waypoint.3 Select MENU > Project Waypoint.4 Enter the bearing, and select Done.5 Select a unit of measure.6 Enter the distance, and select Done.7 Select Save.Moving a Waypoint on the Map1 Select Waypoint Manager.2 Select a waypoint.3 Select MENU > Move Waypoint.4 Select a location on the map.5 Select Move.Finding a Location Near a Waypoint1 Select Waypoint Manager.2 Select a waypoint.3 Select MENU > Find Near Here.4 Select a category.The list displays locations near the selected waypoint.Setting a Waypoint Proximity AlarmYou can add a proximity alarm for a waypoint. Proximity alarmsalert you when you are within a specified range of a particularlocation.1 Select Waypoint Manager.2 Select a waypoint.3 Select MENU > Set Proximity.4 Enter the radius.When you enter an area with a proximity alarm, the devicesounds a tone.Adding a Waypoint to a Route1 Select Waypoint Manager.2 Select a waypoint.3 Select MENU > Add to Route.4 Select a route.Repositioning a Waypoint to Your Current LocationYou can change the position of a waypoint. For example, if youmove your vehicle, you can change the location to your currentposition.1 Select Waypoint Manager.2 Select a waypoint.3 Select MENU > Reposition Here.The waypoint location changes to your current location.RoutesA route is a sequence of waypoints or locations that leads you toyour final destination.Creating a Route1 Select Route Planner > Create Route > Select First Point.2 Select a category.3 Select the first point in the route.4 Select Use.5 Select Select Next Point to add additional points to theroute.6 Select QUIT to save the route.Navigating a Saved Route1 Select FIND > Routes.2 Select a route.3 Select Go.Viewing the Active Route1 While navigating a route, select Active Route.2 Select a point in the route to view additional details.Editing a Route1 Select Route Planner.2 Select a route.3 Select Edit Route.4 Select a point.5 Select an option:• To view the point on the map, select Review.• To change the order of the points on the route, selectMove Up or Move Down.• To insert an additional point on the route, select Insert.The additional point is inserted before the point you areediting.• To remove the point from the route, select Remove.6 Select QUIT to save the route.Viewing a Route on the Map1 Select Route Planner.2 Select a route.3 Select View Map.Navigation 5