Garmin GPSMAP 76 Owner's Manual And Reference Manual

Also see for GPSMAP 76 series: Specification sheet Installation instructions Owner's manual Owner's manual & reference guide Declaration of conformity

42Getting Started42ReferenceEditing WaypointsYou can edit waypoints when they are created or after they have been saved tomemory. There are five items that can be changed, the symbol, name, location,elevation, depth. You can also choose whether to show the waypoint name onthe Map Page.To edit a saved waypoint — Press the MENU Key twice to display the MainMenu. Highlight ‘Points’ and press ENTER, then highlight ‘Waypoints’ andpress ENTER again. Select the desired waypoint from the list (see page 40for more information on the waypoint lists) and press ENTER to display theWaypoint Page. When finished, highlight the ‘OK’ button and press ENTERto accept the changes.Selecting a symbol — Place the highlight on the symbol field and pressENTER. Using the ROCKER, select a symbol from the list and pressENTER. The selected symbol will be displayed at the waypoint location onthe Map Page.Changing the Name — Place the highlight over the name field and pressENTER. Using the ROCKER (up/down) scroll through the alpha-numericlist and make a selection. To move the the next placeholder press theROCKER to the right. When finished, press ENTER to accept the changes.Changing the Location, Elevation or Depth — Place the highlight on thedesired field and press ENTER. Using the ROCKER, scroll through thenumeric list until the desired number is displayed. Press the ROCKER tothe right to move to the next character. When finished, press ENTER toaccept the changes.Show Name on Maps — When ‘Show Name on Maps’ is checked, thewaypoint name will be displayed on the Map Page. To check/uncheck thebox, place the highlight over that box and press ENTER.Symbol Field Name FieldEditing WaypointsThere are four buttons at the bottom of the ‘Mark Way-point’ Page, ‘Delete’, ‘Map’, ‘Goto’ and ‘OK’. If you wishto delete the waypoint, highlight the ‘Delete’ button andpress ENTER. If you want to see the waypoint on themap, highlight the ‘Map’ button and press ENTER. Tobegin direct navigation to the waypoint, highlight the ‘Goto’button and press ENTER. The ‘OK’ button is used tosave any changes that you may have made or to exit thewindow.